Sony Ericsson Codes

Service Codes:

 

View phone ID (IMEI) - * # 06 #

 

Access to the service menu - <* - Displays the version and date of issue of the phone firmware, and you can view the text of all the menus and messages sewn into your phone's memory

 

Access to the lock management menu, SP-Lock menu - - If your phone is not locked, then after dialing the code, nothing will happen. "<< / Strong>" - the joystick left.

 

Installing the English language in the menu - CLR - very necessary code in a case where, among the characters on the phone display

 

Description netmonitor readings Ericsson phones

 

Turning NetMonitor

(If the above method does not work for your phone model, the NetMonitor can only be switched on via an interface cable)

 

· 1. Remove the SIM-kapty.

 

· 2. Activate handset.

 

· 3. Habrat: ** 04 * 0000 * 0000 * 0000 #

 

· 4. Ha word "Wrong PIN" quickly press NO, you get to the menu.

 

· 5. Stpelkoy "left" go to menu "Settings"

 

· 6. In the menu "Settings" find the "Channels" menu, set it to "On"

 

· 7. Exit the menu, call 112.

The indicator displays the 6 groups of numbers.

 

· | --- 1 --- | --- 2 --- | --- 3 --- |

 

· | --- 4 --- | --- 5 --- | --- 6 --- |

 

· 1. The channel number on which the phone can be from 1 to 124. The letter before the number indicates the phone status: B - in standby mode, S - in the call, T - in the course of conversation.

 

· 2. This shows the level of reception (Rx Level). Its value may be from 0 to 63.

0 corresponds to -110dBm,

63 corresponds to -50dBm.

 

· 3. Displays telephone transmitter output power in dBm (during the call and conversation).

39 dBm ----- 8 W

37 dBm ----- 5 W

35 dBm ----- 3,16 W

33 dBm ----- 2 W (maximum for "manual" GSM900 standard terminals)

31 dBm ----- 1,26 W

29 dBm ----- 794 mW

27 dBm ----- 501 mW

25 dBm ----- 316 mW

23 dBm ----- 199 mW

21 dBm ----- 125 mW

19 dBm ----- 79 mW

17 dBm ----- 50 mW

15 dBm ----- 32 mW

13 dBm ----- 20 mW

 

· 4. This shows the number of time slots from 0 to 7. You can see it in the call process.

 

· 5. Here, in the course of the conversation can be seen the number of errors (Bit Error Rate). This parameter ranges from 0 to 7.

0 - errors are practically no more than 5 available connection open, the ear is characterized by a large number of deposition voice conversation.

 

RXQUAL table

0 ----- BER <0,2 (%)

1 ----- 0,2 <BER <0,4

2 ----- 0,4 <BER <0,8

3 ----- 0,8 <BER <1,6

4 ----- 1,6 <BER <3,2

5 ----- 3,2 <BER <6,4

6 ----- 6,4 <BER <12,8 (here we have a loss of half of the data packet)

7 ----- 12,8 <BER

 

· 6. This shows a temporary compensation from 0 to 63. With this option, you can calculate the distance to the base station according to the formula in the conversation: L = 1,11 * TA / 2, where TA - time compensation.

The maximum distance from the BS in the GSM is 35.2 km, respectively one bar in this window is approximately 550 m.

All the mobile phones SONY ERICSSON

 

* # 0000 # or - reset to English

> * << * <* - Shows the service menu "Check", where you can find the firmware version, hold the display test and others.

<** <- Shows the lock status

0 # - call the last number dialed

for T68: run the game "Erix" and start a new game on any difficulty. On the game logo appears, type 123 - will be the game "Snake"

for T68: run the game "Q" and start a new game on the first level of complexity. While hanging on the screen logo games you need to have time to dial 134679 # 5 - there will be a game "Blocks"

for T68: run the game "Ripple" on the game logo appears, you need to have time to dial 654456 - will play "Point"

for T39 and R520m: run the game "Erix" on the game logo appears, you need to press <> # 12 - there will be the game "Snake"

 

 

* # 06 # - IMEI-code output of (International Mobile Equipment Identity)

* # 9999 # - display the software version

* # 0837 # - output version of the software (instructions)

* # 0001 # - output production parameters

* # 0523 # - display adjustment menu

* # 9998 * 523 # - to change the contrast of the display (for versions G60RL01W)

* # 9998 * 523 * 0 # - (for SGH -Rxxx, -Nxxx)

* # 9998 * 289 # - to change the call frequency

* # 9998 * 289 * 0 # - (for SGH -Rxxx, -Nxxx)

* # 9998 * 636 # - Memory status

* # 9998 * 636 * 0 # (for SGH -Rxxx, -Nxxx)

* # 9998 * 746 # - size SIM-file

* # 9998 * 746 * 0 # (for SGH -Rxxx, -Nxxx)

* # 9998 * 778 # - Service table with SIM-card

* # 9998 * 778 * 0 # - (for SGH -Rxxx, -Nxxx)

* # 9998 * 228 # - battery status (capacity, voltage, temperature)

* # 9998 * 228 * 0 # - (for SGH -Rxxx, -Nxxx)

* # 9998 * 842 # - Test Vibrator

* # 9998 * 842 * 0 # - (for SGH -Rxxx, -Nxxx)

* # 9125 # - Set smiles regime in charging mode

* # 9998 * 862 # - Installing a voice encoder mode (normal, the earpiece or speakerphone)

* # 9998 * 862 * 0 # - (for SGH -Rxxx, -Nxxx)

* 0001 * s * f * t # - Change the parameters of the serial

* # 9998 * 324 # - debugger screen

* # 9998 * 324 * 0 # - (for SGH -Rxxx, -Nxxx)

2767 * 3855 # - Full EEPROM Reset (! SP-release) Also changes the IMEI on 447967-89-400044-0

* 2767 * 2878 # - Custom reset EEEPROM

* # 0523 # - Display the adjustment menu

 

 

* # 9999 # -> Show version.

* # 0837 # -> Displays the version of the software (instructions)

* # 0001 # -> Show Serial Parameters

* # 0523 # -> Display adjustment menu

* # 9125 # -> Setting the smiles in charging mode

* # 0000 # - Reset

* # 0289 # - call test

* # 0842 # - test shakes

* # 9998 * 228 # -> battery status (capacity, voltage, temperature)

* # 9998 * 246 # -> Program status

* # 9998 * 289 # -> Change call frequency

* # 9998 * 324 # -> Display Debugger

* # 9998 * 364 # -> Watchdog

* # 9998 * 377 # -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.

* # 9998 * 427 # -> Trace Watchdog

* # 9998 * 523 # -> Change display contrast - for only version G60RL01W

* # 9998 * 544 # -> Jig detect

* # 9998 * 636 # -> Memory status

* # 9998 * 746 # -> SIM File Size

* # 9998 * 778 # -> SIM Service Table

* # 9998 * 785 # -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error.

* # 9998 * 786 # -> Run, Last UP, Last DOWN

* # 9998 * 837 # -> Version

* # 9998 * 842 # -> vibrator test - the screen backlight blinking for 10 seconds and the vibrator is activated.

* # 9998 * 862 # -> Install voice encoder mode (normal, the earpiece or speakerphone)

* # 9998 * 872 # -> Diag

* # 9998 * 947 # -> Reset On Fatal Error

* # 9998 * 999 # -> Last / Chk

* # 9998 * 5282 # - Enter the online settings for downloading Java

* # 9998 * 9266 # -> Yann debug screen (= Debug Screens?)

* # 9998 * 9999 # -> Software version

* # 9998 # * 627 837 793 - File Manager

* # 0228 # - temperature and battery charge

* # 9999 # - version of software

* 0001 * s * f * t # -> Changes serial parameters (Change serial parameters)

SP-Unlock SGH-600 SGH 2100

* 2767 * 3855 # -> Hard Reset l EEPROM (This code removes SP-blokiravku !!). But also changes on 447967-89-400044-0 IMEI, to restore your old IMEI is used for matching

* 2767 * 2878 # -> User reset EEEPROM. This code has been tested on the Samsung SGH-600 with software version FLD_2C6 G60SB03X

 

Layout / pinout Sony Ericsson phone outputs:

 

1- GND

2- RS232 TXD

3- RS232 RXD

4- RS232 RTS

5- MAX 4.2 IN ???

6- GND

7- GND

8- SPK - OUT

9- SPK + OUT

10- SCL I2C comm proprietary bus

11- SDA I2C comm proprietary bus

12- RS232 CTS

13- VCC 5V OUT

14- DC 9V IN

15- DC 9V IN

16- MIC + IN

17- MIC - IN

18- + 3.6V IN battery

19- GND

20- Antenna

21- Antenna

22- GND

23- GND

24- n.c.

25- Temperature sensor IN

26- + 3.6V IN battery

27- GND

28- GND

----------------------------------------------- * # 06 Show IMEI #

* # 8888 # or * # 9998 # * 8888 iron version (HARDWARE Version)

* # 9999 # or * # 9998 * 9999 # Firmware Version (FIRMWARE Version)

* # 0837 # Display Software Version (instructions)

* # 0001 # Displays the serial parameters

* # 9998 * 523 # or * # 9998 * 0523 # or * # 0523 # Menu Display Adjustment

* # 9998 * 523 #

* # 9998 * 523 * 0 # (for SGH -Rxxx, -Nxxx) Changing the display contrast (for G60RL01W version only)

* # 9998 * 289 #

* # 9998 * 289 * 0 # (for SGH -Rxxx, -Nxxx) Changing call frequency

* # 9998 * 636 #

* # 9998 * 636 * 0 # (for SGH -Rxxx, -Nxxx) Memory Status

* # 9998 * 746 # or * # 9998 * 0746 # or * # 0746 # SIM-File Size

* # 9998 * 778 # or * # 9998 * 0778 # or * # 0778 # Service table SIM-card

* # 9998 * 288 # or * # 9998 * 0288 # or * # 0288 # battery status (capacity, voltage, temperature)

* # 9998 * 842 # or * # 9998 * 0842 # or * # 0842 # Test vibrator

(Until you press OK)

* # 9998 * 289 # or * # 9998 * 0289 # or * # 0289 # LED Test

(Until you press OK)

* # 9998 * 862 #

* # 9998 * 862 * 0 # (for SGH -Rxxx, -Nxxx) Setting the voice coder (normal, the earpiece or speakerphone)

* # 9998 * 324 #

* # 9998 * 324 * 0 # (for SGH -Rxxx, -Nxxx) Display Debugger

* # 9998 * 5282 # the Java menu (GRPS / CSD settings for JAVA server)

* # 9125 # Setting the smiles in charging mode

* 0001 * s * f * t # Changing the serial parameters

* * 2767 # Reset JAVA JAVA (delete all JAVA applications)

* 2767 * MEDIA # Reset MEDIA (erases all music and images)

* * 2767 # Reset WAP WAP settings

* 2767 * 3855 # EEPROM reset complete (SP-release!). Also change the IMEI on 447967-89-400044-0

* 2767 * 2878 # Reset User EEEPROM

* # 9998 * masterpwd # Activation Manager files (a message appears that the code is not correct)

* # 9998 * 4357 # code list (File Manager should be activated)

* # 9999 * 0 # NetMonitor Mode (File Manager should be activated)

* # 9998 * 377 # or * # 9998 # * 0377 Error Log (File Manager should be activated)

* # 9998 * 5646 # Selection operator logos at startup (File Manager should be activated)

* # 0RTC # or * # 9998 * 782 # All times are GMT

* # DAIEXIT # Digital Audio Interference Off (switched off, until we leave this mode)

* # DAIENTER # Digital Audio Interference On (enabled until you leave this mode)

# 0007 * # + green

* # 0040 # + green phone Reboot

 

These codes are suitable for the following models SonyEricsson J110, J120, J200, J210, J220, J230, J300, K200, K220, K300, K310, K320, K500, K510, K530, K550, K600, K610, K630, K660, K700, K750 , K770, K790, K800, K810, K850, M600, P1, P990, S500, S700, T250, T610, T630, T650, W200, W300, W380, W380, W550, W580, W600, W610, W660, W700, W710 , W800, W810, W850, W880, W890, W900, W910, W950, W960, Z250, Z300, Z310, Z320, Z520, Z530, Z550, Z555, Z600, Z610, Z710, Z800, P900, P910, P800, R520 , T200, T230, T290, T300, T310, T65, T68, C700, C900, G502, G700, G900, T250, etc.